Specs for wired version below:
The U841A delivers exceptionally intelligible audio reproduction in super-compact, low-profile design. Equipped with UniGuard RFI-shielding technology, this omnidirectional condenser boundary microphone is designed for clear, highly intelligible sound reinforcement, professional recording, television and conferencing in surface-mount applications. The U841A has 360 degrees pickup angle and operates on battery or phantom power.
– Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
– UniGuard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
– UniSteep filter provides steep low-frequency attenuation to improve sound pickup without affecting voice quality
– Small-diameter UniPoint capsule near boundary eliminates phase distortion and delivers clear, high-output performance
– Heavy die-cast case and silicon foam bottom pad minimize coupling of surface vibration to the microphone
– Low-profile design with low-reflectance black finish for minimum visibility
– Operates with Audio Technica Unipack transmitter also available with shorter cable just note desired length in order comments
SPECIFICATIONS | |
ELEMENT | Fixed-charge back plate permanently polarized condenser |
POLAR PATTERN | Omnidirectional in hemisphere above mounting surface |
FREQUENCY RESPONSE | 30-20,000 Hz |
LOW FREQUENCY ROLL-OFF | 80 Hz, 18 dB/octave |
OPEN CIRCUIT SENSITIVITY | 40 dB (10.0 mV) re 1V at Pa |
IMPEDANCE | 270 ohms |
MAXIMUM INPUT SOUND LEVEL | 122 dB SPL, kHz at 1% T.H.D. |
DYNAMIC RANGE (typical) | 101 dB, kHz at Max SPL |
SIGNAL-TO-NOISE RATIO | 73 dB, kHz at Pa |
PHANTOM POWER REQUIREMENTS | 11-52V DC, mA typical |
BATTERY TYPE | 1.5V AA/UM3 |
BATTERY CURRENT LIFE | 0.4 mA 1200 hours typical (alkaline) |
SWITCH | Off, on-flat, on-roll-off |
WEIGHT (MICROPHONE) | 2.8 oz (78 g) |
WEIGHT (POWER MODULE) | 4.9 oz (139 g) |
DIMENSIONS (MICROPHONE) | 2.56″ (65.0 mm) diameter, 0.59″ (15.1 mm) height |
CABLE | 25.0′ (7.6 m) long (permanently attached to microphone), 0.13″ (3.2 mm) diameter, 2-conductor, shielded cable with 4 socket HRS connector also available with shorter cable just note desired length in order comments |
ACCESSORIES FURNISHED | Soft protective pouch |
SPECIFICATION GRAPHS | ||
Click on the chart to view the larger image | ||
![]() | ||
![]() |
Reviews
There are no reviews yet.