Menu Close

AT2022 – X/Y stereo electret condenser microphone

Brand: Audio Technica

$249.00

X/Y Stereo Electret Condenser Microphone

SKU: AT2022 Category:

Manufacturer’s website

The AT2022 is condenser microphone designed for stereo recording. Two unidirectional condenser capsules in an X/Y configuration pivot to allow for narrow (90 degrees) or wide (120 degrees) stereo operation. The capsules also fold flat for storage and transportation. Designed for general stereo recording and field sound capture, the AT2022 provides the spatial impact and realism of live sound field. The microphone comes equipped with stand clamp, AA battery, fuzzy windscreen and .5 cable that terminates in 3.5 mm stereo plug.

  • X/Y stereo microphone with unique pivoting electret condenser capsules for ultimate flexibility
  • Provides the spatial impact and realism of live sound field
  • Battery operation allows use with most recording devices
  • Switchable low-frequency roll-off minimizes pickup of unwanted low-frequency noise
  • User-selectable 90 degrees or 120 degrees stereo operation for narrow or wide pickup patterns
  • Ideal for general stereo recording and field sound capture
  • Excellent channel separation
  • Included fuzzy windscreen offers excellent wind protection

SPECIFICATIONS
ELEMENTS Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN X/Y Stereo
FREQUENCY RESPONSE 20-20,000 Hz
LOW FREQUENCY ROLL-OFF 150 Hz, dB/octave
OPEN CIRCUIT SENSITIVITY -41 dB (8.9 mV) re 1V at Pa
CHANNEL BALANCE <2.5 dB
IMPEDANCE 200 ohms
MAXIMUM INPUT SOUND LEVEL 122 dB SPL, kHz at 1% T.H.D.
DYNAMIC RANGE (typical) 103 dB, kHz at Max SPL
SIGNAL-TO-NOISE RATIO 75 dB, kHz at Pa
BATTERY TYPE 1.5V AA/UM3
WARNING: The AT2022 is designed for battery operation only. Do not attempt to use when phantom power is present. Possible damage to the microphone may result.
BATTERY CURRENT LIFE 1.2 mA 500 hours typical (alkaline)
SWITCH Off, on/flat, on/roll-off
WEIGHT 270 (9.5 oz)
DIMENSIONS 192.0 mm (7.56″) long,
65.0 mm (2.56″) maximum head diameter,
21.0 mm (0.83″) body diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
CABLE 0.5 (1.6′) long, conductor, shielded, vinyl-jacketed stereo cable with 3-pin XLRF-type connector at microphone end and 3.5 mm (1/8″) TRS connector at output end
ACCESSORIES FURNISHED AT8405a stand clamp for 5/8″-27 threaded stands; fuzzy windscreen; battery; soft protective pouch

SPECIFICATION GRAPHS
Click on the chart to view the larger image
POLAR PATTERN
POLAR PATTERN
1 kHz in 90-degree position
POLAR PATTERN
POLAR PATTERN
8 kHz in 90-degree position
POLAR PATTERN
POLAR PATTERN
200 kHz in 90-degree position
FREQUENCY RESPONSE
FREQUENCY RESPONSE

 

Weight 2.1 lbs

Reviews

There are no reviews yet.

Be the first to review “AT2022 – X/Y stereo electret condenser microphone”

Reviews


Wishlist 0
Continue Shopping