The AT899 subminiature omnidirectional microphone is engineered for intelligible, accurate voice reproduction. Its low-profile design (a mere 5 mm in diameter) assures minimum visibility. The mic may be worn as a lavalier and is easily hidden in clothing or hair. Includes a clothing clip, viper clip, magnet clip and lanyard, two windscreens, two element covers, three single mic holders, and two double mic holders.
AT899-SP: 55″ (1.4 m) permanently attached cable (unterminated) with 3.5mm plug
- Maximum intelligibility and clean, accurate reproduction for vocalists, lecturers, stage and television talent, and houses of worship
- Low-profile design (a mere 5 mm in diameter) is ideal for applications requiring minimum visibility
- Operates on battery or phantom power (wired configuration)
- All wireless models available in either low-reflectance black or beige
- Extensive array of provided accessories includes a clothing clip, viper clip, magnet clip and lanyard (black models only), windscreens, element covers, interchangeable single and double mic holders
- Accessories available separately include complete accessory kits, clothing clips, three-pack element covers and three-pack windscreens
- 55″ cable permanently attached to mic
- RoHS compliant—free from all substances specified in the EU directive on hazardous substances
| Microphones | |
|---|---|
| Element | Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern | Omnidirectional |
| Frequency Response | 20-20,000 Hz |
| Low Frequency Roll Off | 80 Hz, 12 dB/octave (wired only) |
| Open Circuit Sensitivity | -46 dB (5.0 mV) re 1V at 1 Pa |
| Output Impedance | 250 ohms (wired only) |
| Maximum Input Sound Level | 116 dB SPL, 1 kHz at 1% T.H.D. |
| Dynamic Range | 86 dB, 1 kHz at Max SPL (wired only) |
| Signal-to-Noise Ratio | 64 dB, 1 kHz at 1 Pa |
| Power Requirements | 2-12vdc “plug in power” |
| Battery Type | N/A |
| Battery Current/Life | N/A |
| Switches | N/A |
| Weight (Microphone) | 0.02 oz (0.5 g) |
| Weight (Power Module) | N/A |
| Cable | 55″ long (permanently attached to microphone), 0.08″ (2.0 mm) diameter, 2-conductor, shielded cable |
| Dimensions | Microphone 16.0 mm long, 5.0 mm diameter |
| Dimensions (Power Module) | N/A |
| Dimensions (Microphone) | 0.63″ (16.0 mm) long, 0.20″ (5.0 mm) diameter |
| Output Connector (Power Module) | N/A |
| Accessories Included | AT8439 cable clip; clothing clip base; viper clip base; magnet clip base and plate with lanyard; three single mic holders; two double mic holders; two element covers; two windscreens; protective carrying case |
| Audio-Technica Case Style | M29 |
