Menu Close

ATW-901a-L

Brand: Audio Technica

$189.95

ATW-R900a receiver and ATW-T901a body-pack transmitter with omnidirectional lavalier microphone._

SKU: ATW-901a-L Category:

Manufacturer’s website


Formerly ATW-901-L


ATW-R900a receiver and ATW-T901a body-pack transmitter with omnidirectional lavalier microphone.


Audio-Technica’s System 9 is a four-channel frequency-agile wireless system designed to provide rock-solid performance along with easy setup and clear, natural sound quality. Featuring sleek, stackable, contemporary styling, System 9 is available in handheld, headworn, guitar, lavalier and body-pack configurations. The system offers four compatible user-switchable VHF channels (169.505, 170.245, 171.045, and 171.905 MHz).


Each System 9 configuration includes the ATW-R900a receiver and either a body-pack transmitter or handheld microphone/transmitter. The ATW-R900a is a non-diversity, single-channel receiver with advanced dipole antenna design for extended operating range, which improves operation by providing a ground element in addition to the usual signal element. The ATW-R900a also offers volume control along with AF Peak, RF and Power indicator lights.



  • Easy operation and clear, natural sound quality

  • 4 selectable frequency-coordinated VHF channels

  • Balanced XLR and unbalanced 1/4″ output jacks enable use with a wide variety of audio gear

  • Reliable performance and durable construction

  • Advanced dipole antenna system for extended operating range

�


RECEIVER SPECIFICATIONS



Receiving System Non-diversity, single-channel, dual antenna system
Image Rejection 50 dB minimum
RF Sensitivity 20 dBuV at 60 dB S/N ratio (50 ohms termination)
Audio Output Nominal Output Level
XLR, balanced: 350 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load)
1/4″ (6.3 mm), unbalanced: 700 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load)
Power Supply 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply
Dimensions 7.48″ (190.0 mm) W x 1.82″ (46.2 mm) H x 5.06″ (128.5 mm) D
Net Weight 12.0 oz (337 grams)
Accessory Included Power supply



BODY-PACK TRANSMITTER SPECIFICATIONS



RF Power Output 10 mW
Spurious Emissions Following federal and national regulations
Input Connections Four-pin Locking Connector
Pin 1: GND
Pin 2: INST INPUT
Pin 3: MIC INPUT
Pin 4: DC BIAS +9V
Batteries Two 1.5V AA
not included
Battery Life 8 hours (alkaline)
Depending on battery type and use pattern
Dimensions 2.76″ (70.2 mm) W x 4.08″ (103.7 mm) H x 0.98″ (24.9 mm) D
Net Weight 2.8 oz (80.0 grams)
without batteries



HANDHELD TRANSMITTER SPECIFICATIONS



RF Power Output 10 mW
Spurious Emissions Following federal and national regulations
Batteries Two 1.5V AA
not included
Battery Life 8 hours (alkaline)
Depending on battery type and use pattern
Dimensions 9.91″ (251.8 mm) long,
2.11″ (53.5 mm) diameter
Net Weight 9.2 oz (260 grams)
without batteries
Accessory Included AT8456a Quiet-Flex stand clamp



First-generation System 9 (original) components:
ATW-R900 receiver
ATW-T901 body-pack transmitter
ATW-T902 unidirectional dynamic microphone transmitter


Click here for the original System 9 Owner’s Manual.



CONSUMER ALERT



Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.


�



�

Weight 6 lbs

Reviews

There are no reviews yet.

Be the first to review “ATW-901a-L”

Reviews


Wishlist 0
Continue Shopping