Menu Close

BP892CW – Wireless Headworn Microphone For Audio Technica Wireless Systems

Brand: Audio Technica

$199.95

Microset Subminiature Wireless Headworn Microphone For Audio Technica Wireless Systems

BP892 Subminiature Omnidirectional Condenser Headworn Microphone, less power module. 1.4 (55 inches) permanently attached miniature cable terminated with locking 4-pin connector for use with Audio-Technica UniPak body-pack wireless transmitters. Includes AT8440 cable clip, AT8464-TH dual-ear microphone mount, two AT8157-TH windscreens, two AT8156-TH element covers, moisture guard, and carrying case. See BP892c-TH for specifications.

– Handles high sound pressure levels with ease Extremely intelligible natural audio Inconspicuous, lightweight headset with capsule diameter of just 2.6 mm is ideal for applications requiring minimum visibility Ergonomic under-ear design flexible, lightweight contoured loop hooks behind the ear for an ultra-secure, comfortable fit with or without glasses Comes equipped with AT8464 Dual-Ear Microphone Mount that converts single ear-worn MicroSet to dual-ear-worn unit for maximum stability and comfort Available in black and beige

Audio-Technicas high-SPL BP892 MicroSet offers the ultimate in low-profile, high-performance audio. Delivering clear and accurate sound in an inconspicuous package, the ultra-lightweight BP892 hooks securely behind either ear and can be worn for hours without fatigue. For maximum stability and comfort, the included AT8464 dual-ear microphone mount converts the MicroSet to dual-ear-worn unit.

The microphone features flat, extended frequency response and other outstanding performance specifications, resulting in extremely intelligible, natural audio for stage and television talent, lecturers and houses of worship. Protected by highly durable Parylene coating, the new headworn mic is built to stand up to the rigors of day-to-day use.

– Handles high sound pressure levels with ease
– Extremely intelligible natural audio
– Inconspicuous, lightweight headset with capsule diameter of just 2.6mm is ideal for applications requiring minimum visibility
– Ergonomic under-ear design, flexible, lightweight contoured loop hooks behind the ear for an ultra-secure, comfortable fit with or without glasses
– Comes equipped with AT8464 Dual-Ear Microphone Mount that converts single ear-worn MicroSet to dual-ear-worn unit for maximum stability and comfort
– High-pass filter on power module provides steep low-frequency attenuation to improve sound pickup without affecting voice quality

 

SPECIFICATIONS

ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Omnidirectional
FREQUENCY RESPONSE 20-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave (wired only)
OPEN CIRCUIT SENSITIVITY 49 dB (3.5 mV) re 1V at Pa
IMPEDANCE 250 ohms (wired only)
MAXIMUM INPUT SOUND LEVEL 135 dB SPL, kHz at percent T.H.D.
DYNAMIC RANGE (typical) 104 dB, kHz at Max SPL (wired only)
SIGNAL-TO-NOISE RATIO 63 dB, kHz at Pa
PHANTOM POWER REQUIREMENTS 11-52V DC, mA typical (wired only)
SWITCH Flat, roll-off (wired only)
CURRENT CONSUMPTION 0.1 mA typical at 5V (wireless only)
VOLTAGE RANGE 2.5-11V (wireless only)
WEIGHT (MICROPHONE) Microphone, boom & earpiece: 2.6 (0.09 oz)
WEIGHT (POWER MODULE) 85 (3.0 oz)
(wired only)
DIMENSIONS Microphone: 8.1 mm (0.32 inch) long, 2.6 mm (0.10 inch) diameter
Boom: 98.4 mm (3.87 inch) long, 1.07 mm (0.04 inch) diameter
DIMENSIONS (POWER MODULE) 97.6 mm (3.84 inch) long, 18.9 mm (0.74 inch) diameter
(wired only)
OUTPUT CONNECTOR (POWER MODULE) Integral 3-pin XLRM-type
CABLE 1.4 (55 inch) long (permanently attached to microphone), 1.6 mm (0.06 inch) diameter, 2-conductor shielded cable with locking 4-pin connector (wired only)
ACCESSORIES FURNISHED BP892: AT8539 power module (wired only); AT8464 dual-ear microphone mount; AT8440 cable clip; two AT8157 windscreens; two AT8156 element covers; moisture guard; belt clip (wired only); carrying case
BP892-TH: AT8539 power module (wired only); AT8464-TH dual-ear microphone mount; AT8440 cable clip; two AT8157-TH windscreens; two AT8156-TH element covers; moisture guard; belt clip (wired only); carrying case
AUDIO-TECHNICA CASE STYLE M31

 

Alternate part numbers and similiar products: BP892CW, BP892CW-TH, BP892CW TH, AT892CW, AT892CW-TH, AT892CW-CO, AT892-CW, AT892-CW-TH, AT892-CW-CO, AT892 CW, AT892 CW-TH, AT892 CW-CO, AT892/CW, AT892/CW

Weight 1 lbs

Reviews

There are no reviews yet.

Be the first to review “BP892CW – Wireless Headworn Microphone For Audio Technica Wireless Systems”
Wishlist 0
Continue Shopping