- For Court Reporters using Eclipse, Case Catalyst, ProCat and other CAT programs
- Four XLR Combo Inputs
- Two 1/4″ TRS Outputs for making backup recordings
- USB output
- Switchable 48v phantom power (TURN OFF with wireless systems – damage may occur and this is not covered under warranty)
- Two 3.5mm Headphone Jacks for live monitoring
- Use with Computer or Mobile Device
- Up to 24-Bit/96 kHz Recordings
- Direct Monitoring and Loopback Function
- Power: USB, AA Batteries, or AC Adapter
Interface features
Court Reporters looking for a compact and versatile audio interface will appreciate the streamlined and easy-to-use feature set on the interface, an ultraportable solution with four XLR microphone inputs, two TRS outputs (for backup recordings), two headphone jacks, a USB Type-C connector, and modes for both streaming and recording applications.
Plug your microphones into the XLR inputs. Monitor via the two 3.5mm headphone jacks. The interface supports 24-bit resolution recordings at sampling rates up to 96 kHz. The interface operates on bus power from your computer, but can also be powered by two AA batteries or an AC power adapter (available separately), if you’re using it with a smartphone or tablet for example.
- 4 XLR Inputs, 2 TRS Outputs, and 2 Headphone Jacks
- The interface includes four XLR combo inputs. It also includes two 3.5mm headphone outputs and 2 TRS outputs for recording to a backup deice (Steno writer or digital recorder)
- Use the interface on any device and integrate seamlessly with commonly used CAT software, apps, and platforms thanks to its support for Mac and PC computers, along with iOS and Android devices. In Streaming mode, all inputs are combined into a single signal, so you can easily stream without needing additional complicated software.
- With onboard hardware switches, the interface is designed to simplify common streaming challenges without the need for additional software. Intuitive knobs allow you to control input gain and monitoring levels.
- Onboard Live Monitoring
- Use the Direct Monitor Switch to directly send the input signal to your headphones while routing the same signal to your CAT software.
- The Loopback Switch combines the input audio with playback from your computer and routes it to your streaming software.
Eclipse users – Very Important! If you will be using the Eclipse CAT software with your new audio system, please contact Advantage software and make sure that Eclipse is up to date. Some audio interfaces require Version 10 or higher to use the multi-channel features.
Wireless microphone system information:
- Up to 300 meters of crystal clear digital wireless transmission
- Separate noise cancellation control with a 48kHz/24bit sample rate in the HD audio format
- Wide-range 20-20,000Hz frequency response delivers exceptional high-quality sound
- 8GB of built-in memory stores up to 15 hours of HD recording in each transmitter
- Transmitters have USB-C ports so that you can connect to a laptop or smartphone to read and/or copy your back-up recorded files
- 10 hours of operating time using the built-in rechargeable batteries (about 6 hours when the onboard backup recording is enabled). Additional run time (up to 65 hours additional hours) is available using battery boosters found here
- The transmitter can be rested on a table or desk or attached to your clothes with the included strong magnet or spring clip
- Rotating clasp-type furry windshield for recording outdoors
- Receiver has a 3.5mm headphone output – use to live-monitor your audio in real-time
- High-resolution OLED display – see vital information at a glance
- Selectable Mono (one channel) or Stereo (two channels). This allows you to record both microphones to one channel (mono) for single channel recording programs or both microphones to 2 different channels (stereo) for mixers and multi-channel programs
- 3.5mm TRS analog output, USB-C and iOS Lightning digital outputs for universal compatibility with mixers, USB audio adapters, cameras, smartphones and computers
- Charging case included – makes the kit easy to carry and charge the devices inside
This product is a portable 2.4GHz wireless microphone system. It features high-performance noise cancellation, which is available for improving the recording effect in a noisy environment. It also boasts a remarkable onboard recording which is available for storing your recording files in real-time. This system is perfect for live streaming, vlogging, mobile journalism, and more. What’s more, equipped with a low-cut filter, the wireless microphone can eliminate unwanted low-frequency noise (75Hz/150Hz or lower) in your recording.
Taylor B. –
Taylor B. – JULY 25, 2023
Boyfriend loved these
Reviewed in the United States
Model name: WIGO II Dual
I bought these so my boyfriend could use it for his gym videos and he loved them he couldn’t stop bragging about how the quality was so good and how now he looked like an official gym youtuber because he’s official now with these mics.
rodolfo –
rodolfo – JULY 17, 2023
Rode GO II Wireless Microphones
Reviewed in Mexico
Model name: WIGO II Dual
A purchase that I had to do a lot, the quality is very good, there is no noise s in the audio, before I used excellent quality Tascam lavaliers but I always have to do the splicing in post and this takes time with these lavaliers, they don’t go straight to your clip and the best thing is that I can connect the Tascam microphones I have to it.
Katherine Hansen –
Katherine Hansen – JULY 13, 2023
Bought by a pro for use by amateurs- long lasting battery and easy to use!
Reviewed in the United States
Model name: WIGO II Dual
I work in corporate video. My company wanted to set up a high-end web video studio to use when I wasn’t there and as part of that effort, I bought these Rode wireless mics. It’s been over a year with nearly 100 uses and I have heard no complaints from anyone.
This means that the batteries are lasting long enough for the 2-3 hour web sessions and have been trouble-free for my coworkers who know as much about wireless mics as I do about brain surgery.
I have purchased more of the Rode Go II wireless mics and receivers for a similar project in our East Coast offices and those have been issue-free, as well.
A great value for the money!
Junior Meshud –
Junior Meshud – JULY 10, 2023
High-quality and practical wireless microphone system – RØDE Wireless GO II
Reviewed in Germany
Model name: WIGO II Dual
The RØDE Wireless GO II is an ultra-compact and wireless two-channel microphone system with built-in microphones. I have mainly used it for reports and on the go and am impressed by its performance and practical use.
The size of the system is remarkably small, making it extremely portable. It can be easily stored in my equipment and is ideal for use when shooting professional videos. I can simply attach it to my shirt or jacket and I’m good to go.
The sound quality of the built-in microphone is impressive. It captures voices and sounds clearly and precisely without recording annoying background noise. This is particularly important for reports and interviews, where a clear and comprehensible tone is important.
Setting up the system is easy and simple. The connection between transmitter and receiver is quick and the microphone is immediately ready for use. The range is sufficient to maintain a stable connection even when the distance between transmitter and receiver is greater.
I’m completely satisfied with the RØDE Wireless GO II, it exceeded my expectations and I’m glad I chose this microphone system. If you’re looking for a high-quality and practical wireless microphone system, I can highly recommend the RØDE Wireless GO II.