Audio-Technica Audio-Technica System 10 PRO Rack-Mount digital wireless system details:
System 10 PRO Rack-Mount digital wireless system provides the same interference-free operation in the 2.4 GHz range (outside TV bands) as the original System 10 wireless system but with expanded features and versatility. The durable half-rack chassis is equipped to house two receiver units that can be operated locally or released from the chassis and mounted remotely (up to 328 feet away) via Ethernet cable. Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a stable, multichannel system with the simultaneous use of up to 10 channels.
| OVERALL SYSTEM SPECIFICATIONS | |
|---|---|
| Operating Frequencies | 2.4 GHz ISM band |
| Dynamic Range | >109 dB (A-weighted), typical |
| Total Harmonic Distortion | <0.05% typical |
| Operating Range | 60 m (200′) Open range env. with no interfering signals |
| Operating Temperature Range | 0 C to +40 C (32 F to 104 F) Battery performance may be reduced at very low temperatures |
| Frequency Response | 20 Hz to 20 kHz Depending on microphone type |
| RECEIVER SPECIFICATIONS | |
|---|---|
| Receiving System | Diversity (frequency/time/space) |
| Output Connectors | Remote Receiver Connector: RJ45 Link Connector: RJ12 |
| Maximum Output Level | XLR, balanced: 0 dBV 1/4″ (6.3 mm), unbalanced: +6 dBV |
| Power Supply | 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external |
| Dimensions | 209.8 mm (8.26″) W x 44 mm (1.73″) H x 169.3 mm (6.67″) D |
| Net Weight | 940 grams (33.2 oz) |
| Accessory Included | Power supply |
| Accessories Included | AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet |
| BODY-PACK TRANSMITTER SPECIFICATIONS | |
|---|---|
| RF Power Output | 10 mW |
| Spurious Emissions | Following federal and national regulations |
| Input Connections | Four-pin Locking Connector Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V |
| Batteries | Two 1.5V AA not included |
| Battery Life | >7 hours (alkaline) Depending on battery type and use pattern |
| Dimensions | 70.2 mm (2.76″) W x 107.0 mm (4.21″) H x 24.9 mm (0.98″) D |
| Net Weight | 100 grams (3.5 oz) without batteries |
Headset details:
BP892cW Subminiature Omnidirectional Condenser Headworn Microphone, less power module. 1.4 (55 inches) permanently attached miniature cable terminated with locking 4-pin connector for use with Audio-Technica UniPak body-pack wireless transmitters.
- Handles high sound pressure levels with ease
- Extremely intelligible natural audio
- Inconspicuous, lightweight headset with capsule diameter of just 2.6 mm is ideal for applications requiring minimum visibility
- Ergonomic under-ear design flexible, lightweight contoured loop hooks behind the ear for an ultra-secure, comfortable fit with or without glasses
Audio-Technica’s high-SPL BP892cW MicroSet offers the ultimate in low-profile, high-performance audio. Delivering clear and accurate sound in an inconspicuous package, the ultra-lightweight BP892 hooks securely behind either ear and can be worn for hours without fatigue.Â
The microphone features flat, extended frequency response and other outstanding performance specifications, resulting in extremely intelligible, natural audio for stage and television talent, lecturers and houses of worship. Protected by highly durable Parylene coating, the new headworn mic is built to stand up to the rigors of day-to-day use.
|
SPECIFICATIONS |
|
|---|---|
| ELEMENT | Fixed-charge back plate, permanently polarized condenser |
| POLAR PATTERN | Omnidirectional |
| FREQUENCY RESPONSE | 20-20,000 Hz |
| LOW FREQUENCY ROLL-OFF | N/A |
| OPEN CIRCUIT SENSITIVITY | 49 dB (3.5 mV) re 1V at Pa |
| IMPEDANCE | 250 ohms |
| MAXIMUM INPUT SOUND LEVEL | 135 dB SPL, kHz at percent T.H.D. |
| DYNAMIC RANGE (typical) | 104 dB, kHz at Max SPL (wired only) |
| SIGNAL-TO-NOISE RATIO | 63 dB, kHz at Pa |
| PHANTOM POWER REQUIREMENTS | N/A |
| SWITCH | N/A |
| CURRENT CONSUMPTION | 0.1 mA typical at 5V (wireless only) |
| VOLTAGE RANGE | 2.5-11V |
| WEIGHT (MICROPHONE) | Microphone, boom & earpiece: 2.6 (0.09 oz) |
| WEIGHT (POWER MODULE) | N/A |
| DIMENSIONS | Microphone: 8.1 mm (0.32 inch) long, 2.6 mm (0.10 inch) diameter Boom: 98.4 mm (3.87 inch) long, 1.07 mm (0.04 inch) diameter |
| DIMENSIONS (POWER MODULE) | N/A |
| OUTPUT CONNECTOR (POWER MODULE) | Hirose 4 pin cW connector for Audio Technica Unipak transmitters |
| CABLE | 1.4 (55 inch) long (permanently attached to microphone), 1.6 mm (0.06 inch) diameter, 2-conductor shielded cable with locking 4-pin connector |
| ACCESSORIES FURNISHED | Windscreens |
| AUDIO-TECHNICA CASE STYLE | M31 |
Reviews
There are no reviews yet.