- Quad-Channel Half-Rack Receiver
- Use with Various D50 Transmitters
- Dante Digital Audio Networking
- LINK Four Receivers to Two Antennas
- 138 MHz US Bandwidth, AES256 Encryption
- Antenna & MRC Diversity Switching
- Filter, EQ & Compressor per Channel
- Includes Rack mounting Hardware
- HD Mode: 47 Mics per 6 MHz Channel
The ATW-DR3240DAN is a Dante®-enabled 4-channel receiver for the D50 digital UHF wireless system. This half-rack receiver operates in one of two switchable RF modes: normal mode (Antenna Combining Diversity) or robust mode (MRC True Diversity) for greater RF stability. Up to four receivers can be linked and operated without antenna distribution, requiring only a single pair of antennas. Plus, the system’s HD (high-density) mode gives users the option of expanding the number of usable frequencies from the standard 17 within a 6 MHz TV channel block to 47 frequencies in HD – a feature that can be especially useful in the congested RF environments of large cities.
The receiver comes with an AC adapter, but can also be powered by PoE+, either exclusively or as a backup power source for the AC. The receiver also features primary and secondary Dante ports for redundancy, 96 kHz high-resolution audio, and monitoring and device configuration.
Features
- Dante®-enabled, 4-channel, half-rack receiver for the D50 digital UHF wireless system
- Full tuning bandwidth of up to 244 MHz, depending on region (up to 138 MHz in the U.S.), in the broadcast range enables flexible channel planning in complex RF environments
- Switchable between normal mode (Antenna Combining Diversity) and robust mode (MRC True Diversity), which offers superior RF stability
- User can switch from Standard mode (17 frequencies per 6 MHz TV channel) to HD mode (47 frequencies per 6 MHz TV channel) when operating in congested urban RF environments
- Onboard DSP offers high-pass filter, 4-band EQ, and compressor settings for each channel
- Supports AES256 encryption for superior security
- Equipped with a network port for monitoring and device configuration via Wireless Manager
- Dante redundancy, daisy-chaining, and 96 kHz sampling rate
- Receiver can be powered by included AC adapter or PoE+; PoE+ also provides redundancy to keep the receiver powered if AC drops out
- Receiver can be set to mixed output in situations where input channels are limited
- Spectrum analysis (accessible via receiver’s front-panel display and/or Wireless Manager software) and IR sync functionality make setup easy
- Wireless Manager’s system management tools include those to configure detailed EQ and COMP settings, and an advanced walk test for visual confirmation of multiple RF conditions
- Multipoint receiver function allows a transmitter to be detected by multiple D50 networked receivers, with Wireless Manager software automatically switching to the receiver that has the best signal
- Included short and long rack ears can be used to mount one receiver in a half-rack space and two long ears can be combined as a joining plate to mount two receivers in a full space
- TAA-compliant (U.S.); Radio Equipment Directive (RED) cybersecurity-compliant (EU)
- Firmware updates are performed in Wireless Manager
- Includes: ATW-DR3240DAN receiver, short and long rack ear kit, power supply, antennas, front-mount antenna kit
Specifications
| Overall System |
| Operating Frequencies |
DF2: 470.125 to 607.875 MHz |
| Modulation Mode |
Standard: 8-PSK
HD mode: 16QAM |
| Occupied Bandwidth |
Standard: 192 kHz
HD mode: 96 kHz |
| Frequency Response |
Standard: 20 to 20,000 Hz
HD mode: 20 to 20,000 Hz
Depending on attached microphone element. |
| Operating Range |
100 m (328′)
Open range environment with no interfering signals. |
| Dynamic Range |
ATW-DT3201 (Mic input): 120 dB, A-weighted, typical
ATW-DT3201 (Inst. input): 109 dB, A-weighted, typical
ATW-DT3202: 120 dB, A-weighted, typical
ATW-DT3207: 120 dB, A-weighted, typical |
| Total Harmonic Distortion |
0.1% or less (at 1 kHz, -20 dBFS) |
| Maximum Simultaneous Use (recommended) |
Standard: 17 channels / 6 MHz
Results may vary depending on the radio environment and usage conditions. |
| Delay |
Standard: 2.1 ms typ.
HD mode: 3.3 ms typ. |
| Audio Sampling Rate |
Standard: 48 kHz
HD mode: 48 kHz |
| Encryption System |
AES256 |
| Notes |
For product improvement, the product is subject to modification without notice. |
| Receiver & Transmitter Specifications |
ATW-DR3240DAN RECEIVER
| Receiving System |
Robust: MRC true diversity
Normal: Antenna combining diversity |
| Image Rejection |
70 dB |
| RF Sensitivity |
-98 dBm (10⁻⁵ BER) |
| Maximum Output Level |
+18 dBV |
| Antenna Input |
BNC, 50 ohms |
| Antenna Power |
12 V DC, 150 mA x2 |
| Maximum Power Consumption |
AC adapter: 22 W (75 Btu/h)
PoE+: 22 W (75 Btu/h) |
| Power Supply |
100 to 240 V AC 50/60 Hz
PoE+ (IEEE 802.3at Class 4) |
| Network |
IP control: 100 Mbps
Dante: 1 Gbps |
| Operating Temperature Range |
-5°C to 40°C (23°F to 104°F) |
| Storage Temperature Range |
-20°C to 55°C (-4°F to 131°F) |
| Cooling Method |
Fan-assisted air cooling |
| Airflow Direction |
Front intake / Rear exhaust |
| Dimensions |
210 mm (8.3”) × 288.2 mm (11”) × 42.5 mm (1.7”) (W x D x H) |
| Weight (without included accessories) |
2.25 kg (5.0 lbs) |
| Included Accessories |
・Whip antenna ×2
・AC adapter (AD-SA1230XA)
・AC cable
・Rubber foot ×4
・Rack-mount adapter (short)
・Rack-mount adapter (long)
・Fixing screw × 7 (3 for the bottom, 4 for the sides)
・BNC cable kit ×2 |
ATW-DR3220LK RECEIVER
| Receiving System |
Robust: MRC true diversity
Normal: Antenna combining diversity |
| Image Rejection |
70 dB |
| RF Sensitivity |
-98 dBm (10⁻⁵ BER) |
| Maximum Output Level |
+18 dBV |
| Antenna Input |
BNC, 50 ohms |
| Antenna Power |
12 V DC, 150 mA x2 |
| Maximum Power Consumption |
AC adapter: 13 W (44 Btu/h)
PoE+: 14 W (48 Btu/h) |
| Power Supply |
100 to 240 V AC 50/60 Hz
PoE+ (IEEE 802.3at Class 4) |
| Network |
IP control: 100 Mbps
Audio-Technica Link: 100 Mbps |
| Operating Temperature Range |
-5°C to 40°C (23°F to 104°F) |
| Storage Temperature Range |
-20°C to 55°C (-4°F to 131°F) |
| Cooling Method |
Fan-assisted air cooling |
| Airflow Direction |
Front intake / Rear exhaust |
| Dimensions |
210 mm (8.3”) × 288.2 mm (11”) × 42.5 mm (1.7”) (W x D x H) |
| Weight (without included accessories) |
2.1 kg (4.6 lbs) |
| Included Accessories |
・Whip antenna × 2
・AC adapter (AD-SA1230XA)
・AC cable
・Rubber foot × 4
・Rack-mount adapter (short)
・Rack-mount adapter (long)
・Fixing screw × 7 (3 for the bottom, 4 for the sides)
・BNC cable kit × 2 |
ATW-DT3201 BODY-PACK TRANSMITTER
| RF Output Power |
Standard: 20 mW, 10 mW, 1 mW
HD mode: 1 mW |
| Input Connection |
Four pin locking connector
Pin 1: GND
Pin 2: INST. INPUT
Pin 3: MIC INPUT
Pin 4: DC BIAS +10V |
| High-pass Filter |
120 Hz, 12 dB/octave |
| Battery |
Lithium-ion battery LI-220 (included) |
| Battery Life |
12 hours (10 mW)
May vary depending on usage conditions. |
| Operating Temperature Range |
-5◦ C to +45◦ C (23◦ F to 113◦ F) |
| Storage Temperature Range |
-20°C to 55°C (-4°F to 131°F) |
| Dimensions |
56 mm (2.2”) × 80 mm (3.1”) × 24 mm (0.94”) (W x D x H) |
| Weight (with included battery) |
172 g (6.1 oz) |
| Included Accessories |
・Transmitter indicator set (seven colors)
・Pouch |
ATW-DT3202 HANDHELD TRANSMITTER
| RF Output Power |
Standard: 20 mW, 10 mW, 1 mW
HD mode: 1 mW |
| Microphone |
Interchangeable microphone capsule-compatible |
| High-pass Filter |
120 Hz, 12 dB/octave |
| Battery |
Lithium-ion battery LI-320 (included) |
| Battery Life |
17.5 hours (10 mW)
May vary depending on usage conditions. |
| Operating Temperature Range |
-5◦ C to +45◦ C (23◦ F to 113◦ F) |
| Storage Temperature Range |
-20°C to 55°C (-4°F to 131°F) |
| Dimensions |
ATW-DT3202 (without capsule): 183.5mm (7.2”) × 37 mm (1.5”) in diameter
ATW-DT3202/C510: 255 mm (10”) × 53.7 mm (2.1”) in diameter |
| Weight (with included battery) |
ATW-DT3202 (without capsule): 245 g (8.6 oz)
ATW-DT3202/C510: 374 g (13 oz) |
| Included Accessories |
・Transmitter indicator set (seven colors)
・AT8456a Quiet-Flex™ microphone stand clamp
・5/8″-27 male to 3/8″-16 female threaded screw adapter
・ATW-RR1 anti-rolling ring
・Pouch |
ATW-T3207 DESK STAND TRANSMITTER
| RF Output Power |
Standard: 20 mW, 10 mW, 1 mW
HD mode: 1 mW |
| Microphone |
Gooseneck microphone supported |
| High-pass Filter |
120 Hz, 12 dB/octave |
| Battery |
Lithium-ion battery LI-220 (included) |
| Battery Life |
When using a gooseneck microphone with no LED: Approx. 9.5 hours (10 mW)
When using a gooseneck microphone with an LED: Approx. 7.5 hours (10 mW)
May vary depending on usage conditions. |
| Operating Temperature Range |
-5◦ C to +45◦ C (23◦ F to 113◦ F) |
| Storage Temperature Range |
-20°C to 55°C (-4°F to 131°F) |
| USB Charging Connector |
USB Type-C (USB 2.0) |
| Dimensions |
90.5 mm (3.56”) × 129.4 mm (5.1”) × 52.1 mm (2.1”) (W × D × H) |
| Weight (with included battery) |
495 g (17 oz) |
| Included Accessory |
Transmitter indicator set (seven colors) |
ESW-CHG6 CHARGING STATION
| Power Supply |
12 V DC, 3.0 A |
| Charging Output |
AC adapter:
When charging one to four transmitters: 5V 1.1A
When charging five or six transmitters: 5 V 0.8 A
When charging seven or eight transmitters: 5 V 0.5 A
PoE+:
When charging one to two transmitters: 5V 1.1A
When charging three to six transmitters: 5 V 0.5 A
Energy-saving mode:
12 V 0.2 A |
| Maximum Power Consumption |
When charging two transmitters:
AC adapter: 15 W (51 Btu/h)
PoE+: 16 W (55 Btu/h) |
| Charging Time |
・AC adapter
ATW-DT3201 (LI-220):
When charging one to four transmitters: Approx. 2 hours 30 minutes
When charging five to six transmitters: Approx. 3 hours 10 minutes
When charging seven to eight transmitters: Approx. 5 hours
ATW-DT3202 (LI-320):
When charging one to four transmitters: Approx. 3 hours 50 minutes
When charging five to six transmitters: Approx. 5 hours
When charging seven to eight transmitters: Approx. 7 hours 10 minutes
・PoE+
ATW-DT3201 (LI-220):
When charging one to two transmitters: Approx. 2 hours 30 minutes
When charging three to six transmitters: Approx. 5 hours
ATW-DT3202 (LI-320):
When charging one to two transmitters: Approx. 3 hours 50 minutes
When charging three to six transmitters: Approx. 7 hours 10 minutes
・Energy-saving mode
ATW-DT3201 (LI-220): Approx. 5 hours
ATW-DT3202 (LI-320): Approx. 7 hours 10 minutes
Results may vary depending on usage conditions. |
| Network |
100 Mbps |
| Operating Temperature Range |
0◦ C to 40◦ C (32◦ F to 104◦ F) |
| Storage Temperature Range |
-20°C to 55°C (-4°F to 131°F) |
| Cooling Method |
Fan-assisted air cooling |
| Airflow Direction |
Front intake / Rear exhaust |
| Dimensions |
145.6 mm (5.7”) × 78.3 mm (3.1”) × 154mm (6.1”) (W x D x H) |
| Weight |
678 g (24 oz) |
| Included Accessories |
・Link cable (short)
・Link cable (long)
・Link plate
・Link plate screws
・Microphone holder |
ATW-CHG7 CHARGING STATION
| Power Supply |
12 V DC, 3.0 A |
| Charging Output |
When charging one to four transmitters: 4.2 V DC 1.5 A
When charging five or six transmitters: 4.2 V DC 1.1 A
When charging seven or eight transmitters: 4.2 V DC 0.7 A |
| Maximum Power Consumption |
When charging four transmitters: 30.6 W |
| Charging Time |
When charging one to four transmitters: Approx. 2 hours
When charging five or six transmitters: Approx. 2 hours 50 minutes
When charging seven or eight transmitters: Approx. 3 hours 40 minutes
Energy-saving mode: Approx. 3 hours 40 minutes
Results may vary depending on usage conditions. |
| Network |
100 Mbps |
| Operating Temperature Range |
0◦ C to 40◦ C (32◦ F to 104◦ F) |
| Storage Temperature Range |
-20°C to 55°C (-4°F to 131°F) |
| Dimensions |
209.9 mm (8.3″) x 303.9 mm (12″) x 65.4 mm (2.6″) (W x D x H) |
| Weight |
866 g (31 oz) |
| Included Accessories |
・Link cable
・Link plate
・Link plate screws
|
ATW-CHGA6 BATTERY CHARGER
| Power Supply |
USB Type-C, ATW-CHG6 |
| Charging Output |
USB Type-C: 4.2 V 0.5 A
ATW-CHG6:
When charging one to four transmitters: 4.2 V 1.2 A
When charging five to six transmitters: 4.2 V 0.8 A
When charging seven to eight transmitters: 4.2 V 0.5 A |
| Charging Time (LI-220) |
USB Type-C: Approx. 5 hours
Results may vary depending on usage conditions. |
| Charging Time (LI-320) |
USB Type-C: Approx. 7 hours 10 minutes
Results may vary depending on usage conditions. |
| Operating Temperature Range |
0◦ C to 40◦ C (32◦ F to 104◦ F) |
| Storage Temperature Range |
-20°C to 55°C (-4°F to 131°F) |
| Dimensions |
63.8 mm (2.5”)×106.8 mm (4.2”) × 25 mm (0.98”) (W × D × H) |
| Weight |
64 g (2.3 oz) |
LI-220 LITHIUM ION BATTERY
| Type |
Lithium ion |
| Output Voltage |
3.6 V DC |
| Capacitance |
2,200 mAh |
| Dimensions |
39.7 mm (1.6″) x 56.7 mm (2.2″) x 13.5 mm (0.53″) (W x D x H) |
| Weight |
49 g (1.7 oz) |
LI-320 LITHIUM ION BATTERY
| Type |
Lithium ion |
| Output Voltage |
3.6 V DC |
| Capacitance |
2,200 mAh |
| Dimensions |
39.7 mm (1.6″) x 56.7 mm (2.2″) x 13.5 mm (0.53″) (W x D x H) |
| Weight |
49 g (1.7 oz) |
For product improvement, the product is subject to modification without notice.
|
Reviews
There are no reviews yet.