Menu Close

Miniature cardioid condenser hanging microphone, phantom power only, includes wall/ceiling plate power module

Brand: Audio Technica

Original price was: $359.00.Current price is: $239.00.

Miniature cardioid condenser hanging microphone, phantom power only, includes wall/ceiling plate power module

SKU: ES933PMC Category: Brand:

The ES933 condenser hanging microphone is designed for quality sound reinforcement, professional recording, television, and other demanding sound pickup applications. Its low-profile design and excellent response make it ideally suited for suspending over choirs, instrumental groups and theater stages.


  • This Product is TAA-Compliant Learn More About TAA-Compliance
  • Designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications
  • Small size and excellent response are ideal for suspension over choirs, instrumental groups and theater stages
  • Available interchangeable elements permit angle of acceptance from 90º to 360º
  • Superior off-axis rejection for maximum gain before feedback
  • Requires 11V to 52V DC phantom
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • Integral UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality

Specifications

Microphones
Element Fixed-charge back plate, permanently polarized condenser
Frequency Response 30-20,000 Hz
Low Frequency Roll Off 80 Hz, 18 dB/octave
Open Circuit Sensitivity -40 dB (10.0 mV) re 1V at 1 Pa
Maximum Input Sound Level 138 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range 109 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 65 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 2 mA typical
Switches Flat, roll-off
Weight (Microphone) 5.5 g (0.2 oz)
Weight (Power Module) 81 g (2.9 oz)
Cable 15.2 m (50′) long (permanently attached to microphone), 3.2 mm (0.13″) diameter, 2-conductor shielded cable, terminated with TA3F-type connector
Dimensions (Power Module) 92.9 mm (3.66″) long, 18.9 mm (0.74″) diameter
Dimensions (Microphone) 27.5 mm (1.08″) long, 8.4 mm (0.33″) head diameter
Output Connector (Power Module) Integral 3-pin XLRM-type
Optional Interchangeable Elements ESE-O omnidirectional (360°), ESE-H hypercardioid (100°), ESE-ML MicroLine® (90°)
Accessories Included AT8109 two-stage foam windscreen, AT8452 steel hanger
Audio-Technica Case Style M25
Weight 1 lbs

Reviews

There are no reviews yet.

Be the first to review “Miniature cardioid condenser hanging microphone, phantom power only, includes wall/ceiling plate power module”

Your email address will not be published. Required fields are marked *


The Sound Professionals, Inc.
Wishlist 0
Continue Shopping