Compare this system to the Rode Wireless GO II:
In addition to all of the features of the Rode Wireless GO II system, this system offers the following:
- Longer battery life (10 hours specified by manufacturer). We have also tested this in our lab using the most power thirsty parameters, with the transmitter gain and receiver output at maximum and the battery actually lasted just under 10.5 hours. This is class-leading performance and a big advantage for anyone that needs extra long battery life. This is in addition to the charge available from the charging case!
- Advanced, intelligent noise filtering available to get rid of unwanted background room noise
- Pristine sound quality – the best we have heard to date from a small wireless system
- Lapel mics are included with this system – no extra charge
- Drop in charging case is included. The charging case for the Rode is an optional accessory. All units charge in the case. Note that you can also charge (and power) each unit with a cable if desired.
- 100% compatibility with connectors included for mobile devices, computers, mixers, cameras, etc.
- More intuitive on-screen menu – no connection to computer needed to access the advanced controls.
Key Features
- Up to 300 meters of crystal clear digital wireless transmission
- Separate noise cancellation control with a 48kHz/24bit sample rate in the HD audio format
- Wide-range 20-20,000Hz frequency response delivers exceptional high-quality sound
- 8GB of built-in memory stores up to 15 hours of HD recording in each transmitter
- Transmitters have USB-C ports so that you can connect to a laptop or smartphone to read and/or copy your back-up recorded files
- 10 hours of operating time using the built-in rechargeable batteries (about 6 hours when the onboard backup recording is enabled). Additional run time (up to 65 hours additional hours) is available using battery boosters found here
- The transmitter can be rested on a table or desk or attached to your clothes with the included strong magnet or spring clip
- Rotating clasp-type furry windshield for recording outdoors
- Receiver has a 3.5mm headphone output – use to live-monitor your audio in real-time
- High-resolution OLED display – see vital information at a glance
- Selectable Mono (one channel) or Stereo (two channels). This allows you to record both microphones to one channel (mono) for single channel recording programs or both microphones to 2 different channels (stereo) for mixers and multi-channel programs
- 3.5mm TRS analog output, USB-C and iOS Lightning digital outputs for universal compatibility with mixers, USB audio adapters, cameras, smartphones and computers
- Charging case included – makes the kit easy to carry and charge the devices inside
This product is a portable 2.4GHz wireless microphone system. It features high-performance noise cancellation, which is available for improving the recording effect in a noisy environment. It also boasts a remarkable onboard recording which is available for storing your recording files in real-time. This system is perfect for live streaming, vlogging, mobile journalism, and more. What’s more, equipped with a low-cut filter, the wireless microphone can eliminate unwanted low-frequency noise (75Hz/150Hz or lower) in your recording.
Transmitter
Transmission Type – 2.4GHz digital frequency
Modulation – GFSK
Polar Pattern – Omnidirectional
Operating Range – Up to 300m (Measured in open environment without obstacles and interference.)
RF Output Power – ＜10mW
Frequency Response – 20Hz-20kHz
Maximum SPL – 115dB SPL
Sampling/ Bit Rate – 48kHz / 24bit
Sensitivity – -32dB±2dB
Signal-to-Noise Ratio – >90dB
Distortion – ＜0.07%
Audio Input – Built-in microphone capsule; 3.5mm TRS mic input or line input
Power Requirements – Built-in lithium-ion battery / Charging contacts / USB-C charging port (DC 5V)
Battery Capacity – 220mAh
Battery Life – ≈10 hours (onboard recording disabled)/ ≈6 hours (onboard recording enabled)
Charging Time – ≈1.5 hours
Memory – 8GB
Maximum Recording Time Stored – ≈15 hours
Recording Format – WAV
Weight – ≈24g
Dimensions – 47mm×29mm×13.5mm
Operating Temperature – 0℃ to +50℃
Storage Temperature – -10℃ to +50℃
Receiver
Display – OLED
Transmission Type – 2.4GHz digital frequency
Modulation – GFSK
Polar Pattern – Omnidirectional
Operating Range – Up to 300m
RF Output Power – ＜10mW
Frequency Response – 20Hz-20kHz
Sampling / Bit Rate – 48kHz / 24bit
Signal-to-Noise Ratio – >90dB
Distortion – ＜0.07%
Audio Output – 3.5mm TRS output / MFi certified Lightning adapter / USB-C adapter
Monitor Port – 3.5mm TRS headphone port
Power Requirements – Built-in lithium-ion battery / Charging contacts / USB-C charging port (DC 5V)
Battery Capacity – 300mAh
Battery Life – ≈11 hours
Charging Time – ≈1.5 hours
Weight – ≈29g
Dimensions – 46mm×34mm×19mm
Operating Temperature – 0℃ to +50℃
Storage Temperature – -10℃ to +50℃
Charging Case – Battery Capacity 1800mAh
Charging Time – ≈2.5 hours
Charging Connector – USB-C charging port (DC 5V)/ Wireless Charging
Times for Charging Microphone – 1.2times
Weight – ≈180g
Dimensions – 115mm×56.2mm×68.5mm
Operating Temperature – 0℃ to +50℃
Storage Temperature – -10℃ to +50℃
In the box
– Transmitter *2
– Receiver *1
– Charging Case *1
– MFi Certified Lightning Adapter *1
– USB-C Adapter *1
– Magnet *2
– Fur Windshield *2
– 3.5mm TRS to 3.5mm TRS Audio Cable *1
– USB-A to USB-C Cable *1
– USB-A to USB-C Adapter *1
– Carrying Pouch *1
– Lavalier Microphone *2
– Mic Clip for Lavalier Microphone *2
– Foam Windscreen for Lavalier Microphone *2
Reviews
There are no reviews yet.