Note: When combining wireless and wired microphones on the same interface, this XLR adapter must be used for the wireless systems
BY-XM6-K2 – 2.4GHz Ultra-compact Wireless Microphone System Kit – includes portable charging case
• Ideal for two-person vlog, YouTube video, live streaming, interview, recording, etc.
• Compatible with DSLR, mirrorless camera, smartphone, and computer.
• 2.4GHz wireless signal transmission technology.
• Hi-Fi and low-noise audio processing and delivering system.
• Built with easy-to-use, vivid, and informative OLED display.
• Built-in omnidirectional microphone
• Headphone output jack on receiver for real-time monitoring.
• Stereo and mono outputs are available and switchable on receiver.
• Built-in Li-ion batteries for 7h use on transmitter and 6.5h use on receiver (optional booster batteries are available)
• Up to 100m (328ft) operation range without obstacles.
• Equipped with a portable charging case
The BOYA BY-XM6-K2, a 2.4GHz adaptive frequency hopping wireless microphone system, consists of two transmitter, one receiver, as well as a charging case. It’s a perfect sound capturing, meanwhile delivering solution for two-person vlog, YouTube video, live streaming, interview, recording, etc.
Advanced Technology for Stable Signal Transmission
The BY-XM6 K2 adopts advanced Adaptive Frequency Hopping (AFH) wireless signal transmission technology, which can make the microphone avoid the disturbed hop frequency parts automatically to realize stable signal transmission in the range of up to 100m (328ft), without obstacle.
Professional Audio Capturing & Delivering
Featuring a high-quality capsule, signal processing circuit with a signal-to-noise over 84dB as well as a distortion rate less than 0.1%, the microphone captures meanwhile delivers high-quality , clear & low-noise audio.
Ultra-versatile & Ease-to-use Wireless Microphone Kit
Ultra-versatile & Ease-to-use Wireless Microphone Kit
The BY-XM6 K2 comes equipped with a portable yet powerful charging case, which makes it can be easily carried outdoors. With the built-in powerful battery, the charging case enables both the receiver & transmitters to be fully charged at the same time, without any cable required. Furthermore, The power indicator on the charging case allows the battery capacity as well as charging status can be easily checked.
TX Transmitter
Transmission Type
|
2.4GHz Digital Frequency
|
Modulation
|
GFSK
|
Operating Range (without obstacle)
|
Up to 328ft (100m)
|
RF Output Power
|
<10mW
|
Polar Pattern
|
Omnidirectional
|
Frequency Response
|
50Hz-18KHz
|
Maximum SPL
|
Built-in Microphone: 120dB SPL
|
Sensitivity
|
Built-in Microphone: -39dB
|
SNR
|
> 84dB
|
Power Requirements
|
Built-in Li-ion Battery or USB-C DC 5V or Charging Contact
|
Built-in Battery Life
|
Approx. 7 hours
|
Antenna
|
PIFA Antenna
|
Audio Inputs
|
3.5mm TRS MIC/LINE IN Jack or Built-in Microphone
|
Weight
|
Approx. 32g(1.13oz)
|
Dimensions
|
62.1×31.6×16.5mm
|
Operating Temperature
|
–10°C to 50°C
|
Storage Temperature
|
–20°C to +55°C
|
RX Receiver
Transmission Type
|
2.4GHz Digital Frequency
|
Modulation
|
GFSK
|
Operating Range (without obstacle)
|
Up to 328ft (100m)
|
Audio Output Connector
|
3.5mm Headphone Jack
|
3.5mm TRS Output Jack
|
|
Audio Output Level
|
–60 dBV to -20dBV
|
Power Requirements
|
Built-in Li-ion Battery or USB-C DC 5V or Charging Contact
|
Built-in Battery Life
|
Approx. 6.5 hours
|
Antenna
|
PIFA Antenna
|
Weight
|
Approx. 32g(1.13oz)
|
Dimensions
|
62.1×31.6×16.5mm
|
Operating Temperature
|
–10°C to 50°C
|
Storage Temperature
|
–20°C to +55°C
|
Charging case
Power Requirements | USB-C DC 5V/1.5A |
Power Capacity | 3000mAh |
Box’s Charging Time | 4.5 hours |
Weight | 200g |
Dimensions | 125×96.8×35.6mm |
Operating Temperature | -10°C to 50℃ |
Storage Temperature | -20°C to +55℃ |
A court reporter from Colorado –
I am a freelance reporter in Colorado and usually do several civil trials a year. I purchased two Boya wireless systems because I was worried about the batteries not lasting long enough with just one, and used both transmitters at the bench for bench conferences. First time EVER I could clearly hear the bench conferences!
I had an old Andrea Electronics microphone I used for backup recording into my software for depositions, but purchased a new “wired” mic anyway. The difference is huge, so I’m glad I replaced the old one!
I purchased the JUST MIC IV mixer so I could plug in the wired mic and ONE of the Boya systems (the second was charging and I would switch them out after lunch).
I muted the Boya system while proceedings were going on and muted the wired mic when there were bench conferences. I tried leaving both on at the same time because sometimes the judge was a bit quiet, but there was a bit of an echo. Didn’t really matter, though, because the audio was CLEAR and this courtroom was LARGE.
One of the other features I LOVED, LOVED, LOVED about the mixer is I had ear buds plugged into it, an ear bud in one ear, and I could turn up the volume, which enabled me to hear things that I could tell opposing counsel didn’t hear at times because I could see a little frown on their face and then they would look at the realtime.
SOOOO GLAD I MADE THIS PURCHASE!!!
Scarlett O’Rork (verified owner) –
It was a bit of a learning curve for me, but Chris patiently answered all one hundred questions for me!
Zero interference from anything else in the courtroom. I love these things! It felt wonderful to cut the wires.