New! The next generation in lapel microphones have 17dB less noise (hiss), 10dB more sensitivity and 10dB higher max SPL than our standard model. They measure an amazing 19dB of equivalent self noise. This means that your recording will have noticeably less background hiss and greater dynamic range than previously possible with standard lapel microphones! Compare these to the best omnidirectional lapel microphones anywhere and you will see why these offer the highest level performance at fraction of the cost of other similar mics.
The microphone is very small about the size of pencil eraser tip (roughly 1/4″ in diameter 1/2″ long ). The cable is terminated in a 3.5mm (1/8 inch) connector. Also available with other connectors (XLR male, iPhone, etc) just add to cart from the accessory list. A lapel clip and removable premium foam windscreen are included.
Features:
- Flat frequency response
- Can be used directly with device that has 1.5 to 10vdc “plug-in-power” available at the mic jack or with one of our battery modules. Note: If your device does not supply any power for microphone, you must use battery module to power your microphone
- Premium windscreen and removable clip included
- 55 inches long (other lengths available – call)
Specifications:
- Pickup Pattern: Omnidirectional
- Frequency Range: 20 Hz – 20,000 Hz +/-1dB
- Sensitivity: -24dB ±3dB @ 94dB SPL
- S/N Ratio (1kHz, 94 dB input, A-weighted): 70dB
- Self Noise: 24 dBA
- Maximum SPL at 12vdc: 115dB
- Dynamic Range: 91dB, 1 kHz at Max SPL
- Impedance: 2.2 kOhms
- Voltage range – 2vdc – 12vdc (48v on XLR version)
- Current draw: 500 µA
Reviews
There are no reviews yet.